Free Lavalier w/orders $50+, WebMic w/orders $150+

Close Accessibility

Universal Camera Shock Mount


Mount your portable recorder, microphone, or other device to your camera's cold shoe mount and prevent distortion with this shock mount.

  • Upgraded design for a stronger build and increased compatibility
  • Universal design - will mount any microphone or recorder with a 1/4" thread
  • Attaches to most cameras via standard hot shoe or tripods via 1/4" thread
  • Discreet, low-profile design
  • Minimize the impact that handling noise can have on a recording
The Movo SMM5 is the perfect shock mount and support for your Zoom portable recorder or other digital microphones.

The microphone and recorder shock mount features a four-point suspension system to minimize the impact that handling noise can have on a recording. The Movo SMM5 shock mount has a universal design and will mount any microphone or recorder with a 1/4" thread. Available in the color black or red.
Construction: Flexible ABS Upper; Aluminum Camera Shoe
Mic/Recorder Mounting Thread: 1/4"-20 male mounting thread
Shoe Mounting Options: Standard Camera Shoe or 1/4"-20 female thread
Dimensions (LxWxH): 3.4" x 2.6" x 2.6" (8.6 x 6.6 x 6.6cm)
Weight: 1.95 oz (55g)

Customer Reviews

Based on 6 reviews
Geoff B.
These perform well and are holding up fine. Unbeatable price.

This is my second one of these. I have a red one I’ve owned for several years, and I bought this one in black for my Sony PCM-D100 recorder. The red one has held up without issues in service with a TASCAM DR-100mkiii recorder. Both recorders are dense and heavy, and the SSM5 suspension is almost perfectly “tuned” for their weight. Great isolation for hand holding. Much sturdier than they appear to be. Recommended.

Alexander M.
Works with Zoom H5

Works fine with my Zoom H5 on my camcorder.

Tom C.

Excellent quality. Using with Olympus LS-P4 microphone/recorder on Olympus OM-D E-M1 Mk ll

Mike B.

I found it to be sturdy and functional. I’m using it with the Olympus LS-P4 microphone mounted on the Zhiyun Weebill S gimbal and Olympus OMD EM1 Mk II camera. In this application I needed to make several additional accessories to allow full gimbal movement. This was accomplished using the magic 3D printing.

Could Provide Better Isolation

This mount is easy to use, but does not provide as much mechanical isolation for my Zoom recorder as I would like. Better than nothing, but some handling vibration gets to the mic.

Not well thought out..

There are two issues I have experienced when using this product:

1) The 1/4" base that is used to keep the shock mount tightly in the hot shoe of my A6500 comes undone with some ease. In other words, it would have been nice if they had copied the design of the Rode VideoMicro in how it is in a fixed position that you can just tighten in place while maintaining perfect alignment.

2) The image depicts black shock mounts and the actual item comes with red. Not a big deal, but if the overall dimensions were smaller and narrower it would save some space for other accessories being mounted on a camera.

Overall it does a good job of slightly reducing handling noise, but it would have been great if the materials were more like Rycote. Even at a higher price, it still would be worth it.